Skip to main content

From property to portfolio-wide: a better way to manage energy.

Two TVA Energy Experts review documents on a counter, collaborating on energy efficiency plans.

Managing energy by property hides where the real savings are — you only see the gap between two similar buildings once you put their numbers side by side. Here’s what a Houchens Food Group lighting upgrade and General Mills’ plant-wide shift both show about the value of a portfolio-wide view.

For most multi-site organizations, energy decisions happen locally. Each property has its own priorities, equipment and operating realities, so improvements tend to happen one building at a time. But when you view each site in isolation, it becomes harder to spot the patterns and opportunities that could create value across the entire portfolio. You can have two buildings that are the same size, but they have different bills.

Two buildings, same size, but different bills.

The problem with managing property by property isn’t waste. It’s that you can’t see all the savings potential. Two locations of similar size and similar hours can run very different energy numbers, and until you put them side by side, nobody knows there’s a gap — or which one is the outlier. A fix that works at one location never reaches the next one, because nobody’s comparing notes.

What one upgrade is actually worth.

Houchens Food Group replaced outdated lighting fixtures in its grocery operations with high-efficiency LED tubes and lamps. The result: it saved $35,455 annually and projected a 619% ROI over 10 years, with incentives cutting the payback period by 31%.

That number reads differently next to grocery margins. Food retailers averaged a 2.1% net profit margin in 2025, according to FMI. At that margin, a grocer would have to sell nearly $1.7 million more in groceries to put $35,455 on the bottom line. The LED upgrade delivers that same result year after year, without another pallet to stock, another shift to staff or another foot of shelf to fill.

Lighting also does work that never shows up in the energy savings. It shapes how fresh cases and shelves look and how long shoppers stay in front of them, and in grocery, the shopping experience is part of the product.

Houchens doesn’t run just one store, though. Its locations share similar layouts, refrigeration, hours and lighting loads, so the project’s real value goes beyond annual savings at any single site. It’s a solution that can be replicated across the portfolio and tuned to each store’s needs, which means the second store is easier than the first. The first fix is a project. The same fix across the portfolio is a program.

What manufacturers figured out first.

Manufacturers have also experienced a similar challenge: how to scale solutions across multiple units or locations.

General Mills spent years watching each plant manage its own utilities before enrolling in the Department of Energy’s Better Plants program. Daren Kaiser, who leads global energy strategy for the company, described the change it created.

Here are two strategies that made that shift real, and both work the same way across a portfolio of buildings.

1. Pick one shared metric. General Mills tracks energy per ton of finished product. For most commercial portfolios, energy per square foot is the equivalent — one number that means the same thing at every location.

2. Put the numbers side by side on a schedule. General Mills runs a quarterly report comparing every plant to its own prior year. Sharing information means that different locations can replicate what’s working elsewhere.

What you’ll actually find when you go look.

Comparing buildings or locations doesn’t tell you what’s wrong inside it. But the answers are more predictable than most people expect, because buildings of the same type tend to drift in the same ways.

The usual suspects:

  • Schedules that stopped matching the building. Store hours changed, the control schedule didn’t. A holiday override from two years ago that nobody turned back off.
  • Setpoints that crept. One complaint about a cold aisle, one adjustment, never revisited. Multiply across a few zones and a few years.
  • Heating and cooling fighting each other. Common in older multi-zone buildings and nearly invisible without someone looking at the controls.

Here’s the part that matters for a portfolio. Most of these cost little or nothing to fix. According to the Department of Energy, low-cost and no-cost improvements can reduce energy use by up to 20% in commercial buildings. It’s not a capital project, which means the first thing your outlier list buys you isn’t a budget request. It’s a list of buildings where somebody could spend an afternoon looking at the controls.

Bigger equipment problems do turn up, and when they do, there are incentives that change the math on the upgrade. But lead with no-cost solutions. They promote buy-in for additional upgrades later.

Take this back to your team.

1. Track one energy metric that works at every location. Energy per square foot is the usual starting point, then pull it into one place.

2. Set up a recurring report that places each location’s number next to the others and its prior-year value.

3. When one location improves, write down what worked and look for where else it applies.

The bottom line: The biggest energy opportunity in a portfolio usually isn’t inside any one building. It’s in the differences between them.

Ready to see what a portfolio-wide view could look like across your locations? Connect with a TVA Energy Expert today.

Author

TVA EnergyRight for Business & Industry Team

Bio

Moving businesses and communities forward. Our team partners with local power companies, contractors and businesses to strengthen the communities we serve with energy efficiency incentives, revitalization programs, strategic energy management and more.

  • A TVA Energy Expert with a tablet discusses energy efficiency upgrades for a commercial kitchen with a business owner.
    Business & Industry

    Your suppliers are avoiding you. Here’s why.

  • TVA Energy Experts, a man with a tablet and a woman gesturing, collaborate on energy-saving initiatives in a building.
    Business & Industry

    The zero-upfront-cost solution to the energy expertise shortage.

  • Business & Industry

    Why your most efficient plant and least efficient plant have never compared notes.