9 easy ways to lower energy costs in your store, restaurant or office.

Every business uses energy in its own way. A restaurant’s coolers run around the clock. A shop pays to cool the sidewalk every time someone props the front door open. An office has a pile of electronics plugged in at every desk, and a lot of it stays on after everyone goes home.
That’s why generic energy advice often misses the mark. ENERGY STAR estimates the average commercial building can cut its energy costs by up to 30% through a mix of no-cost actions, better maintenance and strategic upgrades. Where those no-cost wins are hiding depends on the kind of business you run.
The nine fixes below are grouped for restaurants, stores and offices. Start with yours, but skim the others too. A door sweep works on a kitchen’s back door just as well as a shop’s.
Restaurants

Give your coolers less work to do.
Restaurants use about five to seven times more energy per square foot than other commercial buildings, according to ENERGY STAR, and refrigeration is usually the biggest electricity user in the building. Coolers and freezers never get a night off. Any fix you make here keeps paying off after you lock up.
1. Clean the condenser coils on a schedule.
Dust and grease build up on condenser coils and act like insulation, so the compressor has to run longer to get rid of the same heat. In a Food Service Technology Center field study commissioned by San Francisco’s Department of the Environment, basic coil cleaning cut energy use across 10 units by an average of 17%. The dirtiest unit’s energy use dropped by 49%. Refrigeration service pros suggest cleaning coils at least every six months, and once a month in a high-use kitchen.
2. Check your door gaskets with the dollar-bill test.
Close the cooler door on a dollar bill. If it slides out with no drag, cold air is escaping the same way. Clean the gasket first, because food residue can keep it from sealing. If it’s torn or stiff, replace it.
3. Cool hot food before it goes into the walk-in.
A stockpot straight off the burner warms everything around it and keeps the compressor running hard. Use the cooling methods your food safety plan already calls for, like shallow pans or an ice bath, to bring the temperature down quickly first.
Want more ideas for the kitchen? Read 5 no-cost ways to shrink your restaurant’s biggest electricity draw.
Retail

Keep the air you’ve paid for inside.
An open front door feels friendly. It also lets the air you paid to heat or cool spill right out onto the sidewalk. The Long Island Power Authority estimated that leaving the door open with the air conditioning running can raise a store’s electricity use by 20% to 25%, and Con Edison put the added cost at up to $1,000 over a summer, as NRDC reported. Winter has the same problem. Warm air slips out, and your heating system runs longer to replace it.
4. Let the door close itself.
An inexpensive door closer shuts the door between customers so nobody has to remember. If you’re worried about looking closed, a sign on the glass that says “Come on in, we’re open” handles the welcome for you.
5. Seal the gaps around your doors.
If you can see daylight under a back or side door, heated or cooled air is leaking out there in every season. A door sweep and weatherstripping cost very little and go on quickly.
6. Try an air curtain if an open storefront really matters.
Some shops genuinely do better with the door open. An air curtain mounted above the entrance blows a steady stream of air across the doorway, so more of your heated or cooled air stays inside while customers walk right in.
Offices

Catch the power your electronics waste.
Computers, monitors, printers and chargers are known as plug loads. They typically account for 15% to 25% of an office’s electricity use, according to Energy Trust of Oregon. If you’ve already upgraded your lighting and HVAC, that share can climb as high as half. The first fix below costs nothing.
7. Turn on sleep settings for every computer and monitor.
The setting is already built into the operating system. Set screens to sleep after a few idle minutes, and you’ll save power during lunch, during meetings and every night someone forgets to shut down.
8. Swap standard power strips for smart ones.
A smart power strip cuts power to the monitor, speakers and phone charger when the computer it’s paired with goes to sleep or shuts off. It’s one of the cheapest controls you can add, and once it’s plugged in, nobody has to think about it again.
9. Share one efficient printer.
A row of personal printers spends most of the day sitting idle and still draws power. One shared ENERGY STAR certified printer with auto-sleep turned on can usually do the same work with less energy.
Pick one fix and start this week.
No matter what kind of space you run, you don’t need an energy management background or a big budget to get started. Pick the fix that fits your business best and try it this week. Some of the tools above, including a smart power strip, a door sweep and weatherstrip tape, come in the TVA EnergyRight® Business Energy Kit. The kit is free for qualifying small and medium businesses while supplies last.


